Ready-remote 24927 Manuel d'utilisateur télécharger pdf (Page 44)

5. Wait-To-Start: This chooses the method of Starter output delay

for Diesel engines.

1. Diesel Input wire: An input on the "Red/Blk" wire will

delay the Start output until the input ceases.

2. Diesel Timer: The Starter output will be delayed until the

timer expires. The "Red/Blk" wire will be ignored.

6. Activation Input: Selects the number of inputs from the trans-

mitter or the "Red/Wht" activation input wire to activate the

Remote Starter.

1. 2 Pulses: Two input pulse will Start and Stop the Remote

Starter

2. 1 Pulse: One input pulse will Start and Stop the Remote

Starter

7. Vacation Temp: Selects the temperature threshold that will

activate the Remote Starter when Vacation Mode has been acti-

vated.

1. 0 Degrees F

2. -10 Degrees F

3. -20 Degrees F

8. Alarm Disarm: Selects the output duration of the "Brown/Wht"

Factory Alarm Disarm wire.

1. 1 second: The output will be 1 second in duration

2. 450mS: The output will be 450mS in duration

9. Horn Output: Selects the type of output on the "Blue" Horn

output wire when the alarm is fully triggered but does not affect

the arm/disarm/remote start/programming chirp outputs

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 78 79

Pas de commentaire

Ready-remote 24927 Manuel d'utilisateur Page 44