Ready-remote 24927 Manuel d'utilisateur télécharger pdf (Page 40)

Programming System Settings

Many of the features and operations of this system can be

changed to suit most of today's vehicle electrical systems. The

programming routine and feature menus that follow will allow

making the changes required for most vehicle installations.

System programming routine:

Accessing a Menu:

1. Turn the ignition ON and then OFF in less than 5 seconds

2. Within 3 seconds Press/Hold the Momentary Switch

3. After 2 seconds the LED will flash and the Horn/Siren

will pulse to indicate the available menus. It will toggle

through the outputs until a menu is chosen.

a. Menu 1: 1 LED flash and Horn/Siren pulse

b. Menu 2: 2 LED flashes and Horn/Siren pulses

4. Release the Momentary Switch after the appropriate

output to access that Menu. The LED and Horn/Siren

outputs will cease.

Accessing a Feature Location:

1. Press and release (do not hold) the Momentary Switch

the same number of times as the feature location to be

accessed. See the Feature Chart for locations.

2. After 2 seconds the LED will flash (the number of flashes

will match with the feature location) to confirm the

feature location. It will flash/pause and repeat until the

feature is changed or programming is exited.

3. Press a button on the transmitter to change the feature

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 78 79

Pas de commentaire

Ready-remote 24927 Manuel d'utilisateur Page 40