Ready-remote 24927 Manuel d'utilisateur télécharger pdf (Page 38)

You can learn more than one transmitter function at a time by

advancing to another transmitter learn Step.

To do this, first release the momentary SW and then press/release

it the same number of times as the difference between the current

transmitter learn Step and the desired transmitter learn Step, and

then press/HOLD it.

After Holding the Valet Sw for 2 seconds the LED will flash 8 times

and repeat. You can now learn a transmitter button to step 8.

There are several ways to exit transmitter Learning, by TimeOut,

Ignition or momentary SW Presses.

1. TimeOut: If more than 15 seconds elapse between

momentary SW presses or transmitter signals.

2. Ignition: If the Ignition is turned off at any time during

transmitter Learning.

3. Momentary SW presses: if you press/release the momen-

tary SW more times than transmitter Learning steps in

the menu.

The Horn output will pulse 5 times rapidly and the Led will turn

off to indicate exiting feature programming.

example! To advance from transmitter learn Step 2

to transmitter learn Step 8, release the momentary

SW and then press/release it 6 times and HOLD it

on the 7th press.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 78 79

Pas de commentaire

Ready-remote 24927 Manuel d'utilisateur Page 38