Ready-remote 24927 Manuel d'utilisateur télécharger pdf (Page 57)

2. Make sure the hood is closed and there are no remote

start shut-downs active.

3. Set the emergency brake.

4. Turn the key to the "run" position, this will release the

shifter.

5. Place the shifter in the drive position.

6. Place your foot directly over the brake pedal, but do not

depress it. Be ready to step on the brake if the starter

engages.

7. Activate the remote start system.

8. If the starter does not engage, no additional safety

interfaces are required.

9. If the starter engages, immediately depress the brake to

shut the remote start system down.

IF THE ENGINE ATTEMPTED TO START THE VEHICLE THEN THE TEST

HAS FAILED

CALL TECHNICAL SUPPORT FOR ASSISTANCE AT 1-800-477-1382

warning! If the vehicle fails this test the remote

start must be disabled until the proper Safety

Interface has been installed that will keep the

vehicle from starting while in gear. Failure to do so

may result in property damage, injury or death.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 78 79

Pas de commentaire

Ready-remote 24927 Manuel d'utilisateur Page 57