Ready-remote 24927 Manuel d'utilisateur télécharger pdf (Page 32)

output. The output will then remain on until the transmitter

button is released.

Retained Accessory, Dome Light or Starter Kill wire

The Brown wire has three optional uses depending on the vehicle

application and user preference. The three available operations are

programmable in Feature Menu 2/11

➤

RAP or Retained Accessory Power: This option is

designed to turn off accessories that remain on after the

ignition is turned off. It will pulse 10 seconds after the

remote start status output ceases. It will make the vehi-

cle body control module think the door has opened, thus

turning the accessories off.

➤

Dome Light Supervision: This option will turn on the

dome light for 25 second each time the vehicle is

unlocked. It will cease if on when the doors are locked

or the ignition in turned on.

➤

Start Kill/Anti-grind: This option activates when the

doors are locked to allow for starter kill for the alarm

system and also works as an anti-grind when the remote

start is active.

important! this is a low current output and that

requires an external relay when connected to cir-

cuits that draw more than 400mA in current.

important! this is a low current output and that

requires an external relay when connected to cir-

cuits that draw more than 400mA in current.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 78 79

Pas de commentaire

Ready-remote 24927 Manuel d'utilisateur Page 32