Ready Remote 24927 Guide d'installation télécharger pdf (Page 62)

System Diagnostics

Alarm Diagnostics

When arming or disarming the alarm, this system will alert you of

alarm triggers or active inputs.

Arming Diagnostics:

When arming, if the door or hood is open the Horn/Siren output

and Parking Lights will pulse three times instead of once.

The LED will flash pause, and then repeat 5 times to indicate the

active input. (See alarm input chart.)

The active input will be bypassed. When it has been active for

more than 5 seconds it will be monitored by the system again. All

other alarm inputs will be monitored normally to assure the secu-

rity of the vehicle

Disarming Diagnostics:

When disarming, if the alarm was fully triggered in your absence,

the Horn/Siren output and Parking Lights will pulse four times

instead of twice.

The LED will flash pause, and then repeat 5 times to indicate the

input that caused the trigger (See alarm input chart).

Note! If the alarm was triggered more than once, the

diagnostics will only report the last input that fully

triggered the alarm.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 94 95

Pas de commentaire

Ready Remote 24927 Guide d'installation Page 62