Ready Remote 24927 Guide d'installation télécharger pdf (Page 55)

Feature Menu 1 Descriptions

1. Engine Monitoring: Defines how the engine is monitored while

the Remote Start is active.

1. No Tach: The battery voltage will be used to monitor the

engine while Remote Start is active.

2. Tachometer: The tachometer will be used to monitor

engine speed while Remote Start is active.

2. Run Time

1. 15 minutes: The Remote Starter will shut down after it

has been active for 15 minutes.

2. 30 minutes: The Remote Starter will shut down after it

has been active for 30 minutes.

3. Crank Time: Will be in effect only when Engine Monitoring is

"No Tach" and affects the duration of the "Yellow" Starter Output

wire.

1. Normal Crank: The Starter output will be 700mS.

2. Extra Crank: The Starter output will be 1 second.

3. Super Crank: The Starter output will be 1.4 seconds.

4. Mega Crank: The Starter output will be 2.1 seconds.

4. Ignition 2 Output: This controls the output type of the high

current "Green" Ignition 2 output wire.

1. Ignition 2: Output will match the Blue Ignition 1

input/output wire operation during remote start.

2. Accessory 2: Output will match the White Accessory 1

operation during remote start.

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 94 95

Pas de commentaire

Ready Remote 24927 Guide d'installation Page 55